How it works ?

Step 1:  Put the foam concentrate in the tank at the ratio instructed on the label of the foam concentrate

Step 2:  Fill up the tank with clean water

Step 3:  Close the lid and hand tighten

Step 4:  Connect the cables to a 12 volt battery being careful to put the red wire on the positive terminal and the black   wire on the negative terminal

Step 5: Turn on the switch to start producing foam

Step 6: Turn off the switch to stop the foam production

Step 7: Once finished, make sure to rinse the tank with clean water

 IMPORTANT NOTES:

• The foam thickness and weight depends on the quantity of concentrate you put in the tank.  Make sure to follow the instructions of the foam concentrate and adjust according to your foam thickness/weight needs.
• Our portable foam generator should work with all types of foam concentrate; however,  we cannot guarantee it.